How To Mount Your Ski Addiction Tramp Ski Pro Bindings

How To Mount Your Tramp Ski Pro Bindings

When your Tramp Ski Pros arrive, the bindings will come unmounted to keep everything safe in the box. The setup is simple, and this short video will walk you through it step-by-step.

🪛What You’ll Need:

Tramp Ski Pro skis (White = Left, Black = Right)
Training Bindings (included)
Phillips screwdriver
Flat workspace

Step-By-Step Mounting Instructions:

Identify Left & Right Skis

White ski = Left foot
Black ski = Right foot

(The graphics match nicely, but functionally they’re the same.)

Open the Trap Door

Use your thumb to pop open the black latch under the toe strap.
Inside, you’ll find the mounting disc.

Set Binding Angles

Line up the small arrow on the disc with the “0” mark to set your binding straight.
Need to rotate it? Push from underneath to spin the disc into position.

Adjust Binding Position

Align the disc so the four holes are visible.
Small feet? Mount forward.
Large feet? Mount further back.
Average size? Use one of the middle positions.

Secure With Screws

Insert all 4 screws and tighten them as much as you can by hand.
No power tools - just firm and snug.

Close the Trap Door

Once tight, close the door and repeat on the second ski.

That’s It - You’re Ready To Go

Once both bindings are mounted, your Tramp Ski Pro is ready for training. Whether you’re working on spins, air awareness, or jib tricks, this setup is built to help you progress fast.

Still stuck? Reach out to our team, and we’ll get you sorted.

← →